The Binks MACH Plural Component 1PC HVLP spray gun is a two- component manual gun with a specially designed catalyst injector. This injector is mounted through the air cap of the gun where it is atomized. It is used primarily for catalyst activated adhesives.

Highlighted features:

Conventional style air spray gun with special nozzles and modifications that allow it to operate at high transfer efficiencies

Air inlet passage in the gun body incorporates a venturi which limits airflow

High pressure airflow is converted to low pressure at this point

Special air and fluid nozzles enable the gun to atomize fluid at low air pressures and velocities

Balanced forged aluminum body

The MACH 1PCX spray gun is a two-component HVLP spray gun used primarily for gel coats and other externally catalyzed materials.

Highlighted features:

Conventional style airspray gun with special nozzle and modifications that allow it to operate at high transfer efficiencies

Air inlet passage in the gun body incorporates a venturi which limits airflow

High pressure airflow is converted to low pressure at this point

Special air and fluid nozzles enable the gun to atomize fluid at low air pressures and velocities

Balanced forged aluminum body

Model 43P has an internal impingement method of fluid mixing with no moving parts. Mixing chamber has replaceable PTFE liner. A separate, independent solvent flush valve and control make gun head clean out fast. Spray is up to 20 lbs capacity using a patented static mixing principle. Guns are extremely versatile and their extra features provide the operator with greater control over spraying applications.

Highlighted features:

Resin inlets with spring loaded check valves

Separate inlet for solvent purge

Externally removable impingement orifices

Ball type needle fluid valves

Gun head clean- out ports/Interchangeable spray tips

Trigger safety lock

Stainless steel head, aluminum body

Various pour/atomizing adapters available

Interchangeable orifice sizes for off- ratio materials

Model 43PA: an air-operated piston controls the triggering of this two-component automatic gun for both resin flow and solvent flush of the mixing chamber. Except for its automatic application, the construction, range of materials and viscosity are similar to the Model 43P. 43PA Series Hydraulic Atomization Guns are specially designed for spraying low to medium viscosity plural component materials. By virtue of internal mixing, the resins do not encounter air until, thoroughly mixed, they are sprayed from the gun nozzle.

Highlighted features:

Resin inlets with spring loaded check valves

Separate inlet for solvent purge

Solvent purge control

Externally removable impingement orifices

Ball type needle fluid valves

Gun head clean-out ports

Interchangeable spray tips

Trigger safety lock

Stainless steel head, aluminum body

Various pour/atomizing adapters available

Interchangeable orifice sizes for off-ratio materials