The JV-CG Series Flow Meter for metering non-lubricating, small-particle fluids of medium to high viscosity such as paints, sealants and resins. meter bodies and gears are constructed of stainless steel. Shafts are a sealed-sleeve style, and bearings are made of strong tungsten carbide. The result is long lasting service and precision operation. Sophisticated sensors provide highly accurate fluid monitoring. Sensor choices are frequency output or analog output, including fiber optic and intrinsically safe models.

Features include:

Flow ranges from 0.001 to 20 GPM

Accuracy 0.5% over 10:1 turndown with 30 cP fluid

Pressure rating up to 5,000 PSI

Economical cost

Six different flow ranges available

Stainless Steel construction

Pulse, mA and Voltage sensors available Bi-directional flow capabilities

The JVHS Flow Meter gear meters are durable, accurate, and safe in high pressure environments. The JVHS series all can be hydro tested to 1.5 times the working pressure rating. These meters, constructed of 316 stainless steel with Xylan-coated bolts (Xylan is a registered trademark of The Whitford Company), come equipped with medium-pressure autoclave connections. These units are for use in high pressure hydraulic and fuel systems; in offshore chemical injection systems including methanol, corrosion and wax inhibitors; or in water treatment chemical-injection systems.

Features include:

Three flow ranges from 0.003 to 7.0 GPM

Accuracy: up to 0.5% of reading

Pressure rating up to 15,000 PSI (1035 bar)

Bi-directional flow capabilities

Non-intrusive sensors, panel mount displays, and electronic modules available

Medium pressure Autoclave connections

The JVK Plastic Flow Meter is specifically designed for the chemical dispensing industry. Molded of tough thermoplastic and made to provide years of service, these flow meters stand up to the strongest chemicals, including acids, caustic based fluids, and corrosives.

Features include:

Flow range from 0.1 to 7.0 GPM

Accuracy up to 0.2% of reading

Pressure rating up to 500 PSI Kynar (PVDF) bodies

PVFE gears and O-ring Ceramic (Al2O3) shafts

Bi-Directional flow capabilities (*Kynar is a registered trademark of Arkema, Inc.)

The JVKG Fear Flow Meter for lubricating fluids (with Ball Bearings). Ideal flow meter for oils, grease, fuel, solvents, polyurethanes, brake fluid, Skydrol and other non-abrasive lubricating fluids, such as in the process of measuring cylinder position in engines. The units in this line of AW flow meters are designed to maintain consistent accuracy – even in changing viscosity conditions. They have a solid construction and excellent dynamic response. Reliability combined with accuracy and a large turndown range, make these meters an attractive replacement for older turbine technology.

Features include:

Flow ranges from 0.003 to 120.0 GPM

Accuracy up to 0.1% of reading

Pressure rating up to 5,000 PSI

Aluminum, 303 and 316 stainless steel bodies

Pulse, mA and Voltage sensors available Bi-Directional flow capabilities

MicroFlow Flow Meter for Chemicals & Oils is the ideal flow meter for low and medium viscosity fluids (solvents, polyurethanes, oils and other non-abrasive liquids) at very low flow rates, as in chemical injection.

AW Gear Meters offers these spur gear positive displacement flow meters that are suitable for a variety of industrial applications including: Chemical injection skids, Fuel & solvent measurement, Liquid seal bead dispensing, Cylinder position measurement, Batching, Low flow applications to 2 cc/min (0.0005 gal/min)

Features include:

Flow ranges from 2 to 946 cc/min

Accuracy up to 0.5% or better

Pressure rating up to 5,000 PSI

316 stainless steel bodies

Pulse, mA and Voltage sensors available

Bi-Directional flow capabilities

Certifications: ATEX approved, non-sparking, CSA Class 1, Div. 1