The CAPM-15 High Temperature Sensor System consists of a CAPM-15/AMP signal amplifier module and the CP-30 high temperature carrier frequency pickup. The CAPM-15 is used with JV-CG and JV-KG gear meters (NOT FOR USE WITH ALUMINUM BODY METERS).

Features include:

Pickup system includes CAPM-15/AMP signal amplifier module and the CP-30 high temperature carrier frequency sensor

Safe for medium temperatures up to 400°F

Supply voltage between 10 and 30 VDC

Protected against reversed polarity on the voltage supply

Intrinsically safe CAPM-3o version available

7' cable between sensor and amplifier included

The CAPM-2 Carrier Frequency Sensor is used with JV-CG and JV-KG meters (NOT FOR USE WITH ALUMINUM METERS). Carrier Frequency means there is no permanent magnet in the pickup, and any magnetic drag on the flow meter is avoided. The CAPM-2 requires a supply voltage between 10 VDC and 30 VDC. A diode in the supply input prevents damage to the module in case the polarity of the supply voltage is wrong. The output signal is a square wave, voltage pulse of approximate amplitude (supply – 1.5 V).

*CAPM-2N is used with the HPM series and the TR series of flow meters
*CAPM-2o is a UL & cUL approved, intrinsically safe pickup sensor for use in Class 1, Div. 1 locations

Features include:

Sourcing output (PNP type sourcing open collector transistor)

Intrinsically safe CAPM-2o version available

IS safe version UL & cUL certified for use in Class 1, Div 1 locations

Output signal is a square wave, voltage pulse of approximate aplitude (supply - 1.5V)- the frequency is proportional to the flow rate

The CAPM-3 Carrier Frequency Sensor is used with HPM-SLG and JVS-SLG gear meters. Carrier Frequency means there is no permanent magnet in the pickup, and any magnetic drag on the flow meter is avoided. The CAPM-3 requires a supply voltage between 10 VDC to 30 VDC. A diode in the supply input prevents damage to the module in case the polarity of the supply voltage is wrong. The output signal is a square wave, voltage pulse of approximate amplitude (supply - 1.5 V). The frequency is proportional to the flow rate.

*CAPM-3o is a cUL approved, intrinsically safe pickup sensor for use in Class 1, Div. 1 locations

Features include:

Flush mount style

Sourcing output (PNP type sourcing open collector transistor)

Intrinsically safe CAPM-2o version available

IS safe version UL & cUL certified for use in Class 1, Div 1 locations

Output signal is a square wave, voltage pulse of approximate aplitude
(supply - 1.5V)

Features include:

ATEX Certification

Safe for medium temperatures up to 120°C (with a distance of at least 25 mm between flow meter and amplifier housing

Supply voltage +8.5 up to 29 VDC, controlled

Frequency range 2 up to 4,000 Hz

7' cable between sensor and amplifier included