Site Settings


Pick Color(Current Color is blank)

Pick Color(Current Color is #555555)

Pick Color(Current Color is #000000)

  • Custom CSS
  • Custom JS

CATEGORIES

Hall Effect Sensors

PRODUCTS

  • DH-X and -XX Dual Hall Effect Sensor
    Call for pricing

    The DH-X & -XX Dual Hall Effect Sensor is used with JV-CG and JV-KG series of positive displacement flow meters up to -60 size (excluding JVM-01CG). The sensors’ mode of operation is determined by an output selection switch located inside the housing. The DH detects the rotation of the flow meter’s gears and emits a frequency signal proportional to flow.

    Features include:

    Detects both uni- and bi-directional flow

    Output signal is a square wave pulse with duty cycle of approx. 50%

    DH signal outputs protected with a 50mA nominal trip point self-resetting fuse

    Two different output configurations: sinking output and sourcing output

    Output signal of either 2X pulse resolution in a signal pulse train (default) or a quadrature signal with a 90° phase shift

    Sensor circuit board is equipped with a red and green LED​

  • HEF Hall Effect Sensor
    Call for pricing

    The HEF Hall Effect Sensor is compatible with the JV-CG and JV-KG series of flow meters except JVM-01CG. The HEF-1 is compatible with the JVM and SLG series. The sensor detects the rotation of the flow meter’s gears and emits a frequency signal proportional to flow. HEF signal outputs are protected with a self-resetting fuse. This fuse has a 50mA nominal trip point.

    Features include:

    Output signal is a square wave pulse which has a duty cycle of approximately 50%

    HEF signal outputs are protected with a 50mA self-resetting fuse

    HEF sensor has two different output configurations: HEF-A or HEF-AA for a sinking output and HEF-B or HEF-BB for sourcing output

    Sensor is compatible with Aluminum, 303 Stainless Steel and 316 Stainless Steel gear meter bodies

  • HUB-40EX Hall Effect Sensor
    Call for pricing

    The HUB-40EX Hall Effect Sensor is used with all JV-CG-Ex and JV-KG-Ex meters The HUB-40Ex is a frequency output, pickup sensor certified for use in explosion proof areas. The sensor detects the rotation of an approved flow meter’s gears and emits a frequency signal proportional to the flow. The output signal is a square wave pulse, which has a duty cycle of approximately 50%. MAG signal outputs are protected with a self-resetting fuse. This fuse has a 50 mA nominal trip point.

    Features include:

    Hall effect sensor

    Fuse

    Amplified pulse output (0-2000 Hz capability)

    3/8" NPT threaded meter connection

    EX junction box with terminal block connection point

    1/2" NPT conduit entry

    Class I, Div I Hazardous area certified

  • MAG-J-Px Hall Effect Sensor (A&B)
    Call for pricing

    The MAG-Jx Hall Effect Sensor is compatible with all AW and KEM Positive Displacement gear flow meters except ZHM-04 to the ZHM-07KL. The sensor detects the rotation of the flow meter’s gears and emits a frequency signal proportional to flow. MAG-J signal outputs are protected with a self-resetting fuse. This fuse has a 50mA nominal trip point.

    Features include:

    Detects both uni- and bi-directional flow

    Output signal is a square wave pulse with duty cycle of approx. 50%

    MAG-J signal outputs protected with a 50mA nominal trip point self- resetting fuse

    MAG-J sensor has two different output configurations: MAG-J-PA for a sinking output and MAG-J-PB for a sourcing output

    Identical to MAG-Px, but with 1/2" junction box

  • MAG-Px Hall Effect Sensor (A&B)
    Call for pricing

    The MAG-Px Hall Effect Sensor is compatible with all AW-Lake Company and KEM Positive Displacement gear flow meters except ZHM-04 to the ZHM-07KL and all AW Company and KEM turbine flow meters. The sensor detects the rotation of the flow meter’s gears and emits a frequency signal proportional to flow. MAG signal outputs are protected with a self-resetting fuse. This fuse has a 50mA nominal trip point.

    Features include:

    Detects both uni- and bi-directional flow

    Output signal is a square wave pulse with duty cycle of approx. 50%

    MAG signal outputs protected with a 50mA nominal trip point self-resetting fuse.

    MAG sensor has two different output configurations: MAG-PA for a sinking output and MAG-PB for a sourcing output

  • 12