The Basic Turbine Flow Meter (TW Series) was designed for use in produced water or oil/water separator equipment applications in the oil & gas industry. With close attention paid to the design of the internals, the TW meter consistently maintains high accuracies and is ideal for water, light oils, solvents, chemicals and fuels. The meter and the meter internals are perfect alternative drop-in replacements for NuFlo/Haliburton, KimRay and Blancett turbine flow meters.

Technical Specifications and features:

Flow ranges: 5 to 50 GPM  
                    40 to 400 GPM (gal/min)

Working pressure up to 5,000 psi

Accuracy ±1.0% of reading or better

Repeatability ±0.1%

Fluid temperature of  -150° to 325°F

Filtration 300 microns

End Connections: standard NPT end connections for universal applications

All stainless steel construction and tight machining tolerances make for excellent durability/long life

Mainentance is easy- Rotor can be replaced in just 2-3 minutes

The sturdy construction of the Standard Turbine Flow Meter (TRG Series) means high performance and longer service life at an affordable price. This is the ideal turbine flow meter for monitoring solvents and other lower viscosity fluids, such as antifreeze and fuel measurement.

Technical Specifications and features:

Multiple Flow ranges: .08 to 5,000 GPM (gal/min)

Working pressure up to 5,000 psi

Accuracy ±1.0% of reading or better

Repeatability ±0.1%

Turn Down Ratio: 10:1

Fluid temperature of  -150° to 450°F

Filtration 300 microns

End Connections: standard NPT end connections for universal applications

This meter is capable of measuring flow in line sizes from 1/2” to 10”

This meter can provide displayed flow rate, totalization, current or voltage outputs through a variety of compatible electronics

The HM Turbine Flow Meter (HM Sereis) is ideal when measuring the flow of fluids under high pressures, such as in hydraulic testing. It is also perfect for chemical injection systems,
as it withstands pressures up to 15,000 psi and is available in seven different flow ranges, from 0.08 GPM to 16 GPM.

Technical Specifications and features:

Multiple Flow ranges: .08 to 16 GPM (gal/min)

Working pressure up to 15,000 psi

Accuracy ±1.0% of reading or better

Repeatability ±0.1%

Turn Down Ratio 10:1

Fluid temperature of  -150° to 450°F

Filtration 300 microns

End Connections: AutoClave

Twist of flow in the turbine wheel/ bearing area has a self-cleaning effect for the bearing

The Flanged Turbine Flow Meter (HM...F Series) is ideal when measuring the flow of fluids under high pressures, such as in hydraulic testing. It is also perfect for chemical injection systems, as it withstands pressures up to 15,000 psi and is available in seven different flow ranges, from 0.08 GPM to 16 GPM.

Technical Specifications and features:

Flow ranges: .008 to 12,000 GPM (gal/min)

Working pressure up to 15,000 psi

Accuracy ±1.0% of reading or better

Repeatability ±0.1%

Turn Down Ratio 10:1

Fluid temperature of  -459° to 662°F

Filtration 300 microns

End Connections: Equipped with flanges as per DIN or ANSI

Twist of flow in the turbine wheel/ bearing area has a self-cleaning effect for the bearing

The sturdy construction of the Subsea Turbine Flow Meter means high performance and longer service life. With completely sealed off electronics, there is no need for electronics module canister space.

Technical Specifications and features:

Available in Multiple Flow ranges: Up to 16 GPM (gal/min)

External pressure up to 7,200 psi

Operating Pressure up to 20,000 psi

Connection: AutoClave

Temparature Range -40 to 250°F (-40 to 121°C)

Frequency Range: 2 up to 2,000 Hz

Electronic Connections 6-pin receptacle (or customer specified for custom meters)

Output: Available in amplified pulse or 4-20mA output