Site Settings


Pick Color(Current Color is blank)

Pick Color(Current Color is #555555)

Pick Color(Current Color is #000000)

  • Custom CSS
  • Custom JS

CATEGORIES

Smart Pumps Electric Drive

PRODUCTS

  • E2-15 Electric Drive Pump
    Call for pricing

    The E2-15 unit combines conventional electrical hardware to achieve optimum operating performance at a lower cost. Running costs are much lower than compressed air driven models. An optional smart card can produce even higher savings in running cost by running in an open or closed loop mode. This delivers the paint to the user point at the correct pressure and volume only when needed.The Model E2 Electric Pump achieves a reciprocating drive by using a cam and cam followers combined with a sliding carriage unit. Equal thrust on each stroke together with the special cam profile reduces fluid pressure fluctuations to an absolute minimum.
     
    Features include:

    Gearbox Ratio 56:1

    Flow(GPM) @ 20 HZ :  1

    Flow(GPM) @ 80 HZ :   4

    High Quality materials and surface treatments are used in the construction of this pump to ensure extended operational life
     
    Horizontal Short Stroke Design - Equal thrust on both pistons provide identical flow and pressure for both strokes
     
    Reciprocating drive – achieved by a sliding carriage mechanism and rotating constant velocity cam with special profile reducing fluid pressure fluctuations to a minimum. (No surge chamber required)
     
    Piston seal is lubricated by paint on both sides, increasing seal life. Design means No external paint leaks when seal needs replacement
     

  • E2-30 Electric Drive Pump
    Call for pricing

    The E2-30 unit combines conventional electrical hardware to achieve optimum operating performance at a lower cost. Running costs are much lower than compressed air driven models. An optional smart card can produce even higher savings in running cost by running in an open or closed loop mode. This delivers the paint to the user point at the correct pressure and volume only when needed.The Model E2 Electric Pump achieves a reciprocating drive by using a cam and cam followers combined with a sliding carriage unit. Equal thrust on each stroke together with the special cam profile reduces fluid pressure fluctuations to an absolute minimum.
     
    Features include:

    Gearbox Ratio 56:1

    Flow(GPM) @ 20 HZ :  2

    Flow(GPM) @ 80 HZ :  8

    High Quality materials and surface treatments are used in the construction of this pump to ensure extended operational life
     
    Horizontal Short Stroke Design - Equal thrust on both pistons provide identical flow and pressure for both strokes
     
    Reciprocating drive – achieved by a sliding carriage mechanism and rotating constant velocity cam with special profile reducing fluid pressure fluctuations to a minimum. (No surge chamber required)
     
    Piston seal is lubricated by paint on both sides, increasing seal life. Design means No external paint leaks when seal needs replacement

  • E2-40 Electric Drive Pump
    Call for pricing

    The E2-40 unit combines conventional electrical hardware to achieve optimum operating performance at a lower cost. Running costs are much lower than compressed air driven models. An optional smart card can produce even higher savings in running cost by running in an open or closed loop mode. This delivers the paint to the user point at the correct pressure and volume only when needed.The Model E2 Electric Pump achieves a reciprocating drive by using a cam and cam followers combined with a sliding carriage unit. Equal thrust on each stroke together with the special cam profile reduces fluid pressure fluctuations to an absolute minimum.

    Features include:

    Gearbox Ratio 56:1

    Flow(GPM) @ 20 HZ : 2.64

    Flow(GPM) @ 80 HZ : 10.6

    High Quality materials and surface treatments are used in the construction of this pump to ensure extended operational life

    Horizontal Short Stroke Design - Equal thrust on both pistons provide identical flow and pressure for both strokes

    Reciprocating drive – achieved by a sliding carriage mechanism and rotating constant velocity cam with special profile reducing fluid pressure fluctuations to a minimum. (No surge chamber required)

    Piston seal is lubricated by paint on both sides, increasing seal life. Design means No external paint leaks when seal needs replacement

  • E4-60 Electric Drive Pump
    Call for pricing

    The E4-60 unit combines conventional electrical hardware to achieve optimum operating performance at a lower cost. Running costs are much lower than compressed air driven models. An optional smart card can produce even higher savings in running cost by running in an open or closed loop mode. This delivers the paint to the user point at the correct pressure and volume only when needed.The Model E4-60 Electric Pump achieves a reciprocating drive by using a cam and cam followers combined with a sliding carriage unit. Equal thrust on each stroke together with the special cam profile reduces fluid pressure fluctuations to an absolute minimum.
        
    Features include:

    Gearbox Ratio 56:1

    Flow(GPM) @ 20 HZ : 4

    Flow(GPM) @ 80 HZ : 16    

    High Quality materials and surface treatments are used in the construction of this pump to ensure extended operational life

    Horizontal Short Stroke Design - Equal thrust on both pistons provide identical flow and pressure for both strokes

    Reciprocating drive – achieved by a sliding carriage mechanism and rotating constant velocity cam with special profile reducing fluid pressure fluctuations to a minimum. (No surge chamber required)

    Piston seal is lubricated by paint on both sides, increasing seal life. Design means No external paint leaks when seal needs replacement

  • 1