Site Settings


Pick Color(Current Color is blank)

Pick Color(Current Color is #555555)

Pick Color(Current Color is #000000)

  • Custom CSS
  • Custom JS

CATEGORIES

Festoon Systems

Festoon Systems

PRODUCTS

  • Track Master Festoon Systems are available in 3 sizes (C40, C50, C60) and with either clips for round cables/hoses (series C40-C and C50-C only), cable clamps for flat cables (series C40-F, C50-F, and C60-F), or specially designed clamps for holding a mixed load of hoses, round cables and flat cables (series C50-M and C60-M only).

    A typical system consists of an end clamp which secures the cable or hose at the non-moving end, a tow trolley or control unit trolley which is moved back and forth manually or by a machine, and a series of intermediate trolleys supporting the cable or hose. The quantity of intermediate trolleys is determined by two factors; the travel distance of the system and the depth of the cable or hose loops. The trolleys roll smoothly in a specially formed “C” shaped track.

  • Beam Master Festoon Systems- Heavy Duty I-Beam Supported Festoon Systems are designed for high speed. High load applications. Maximum speeds, depending on model, range from 350 to 800 fpm (feet per minute) with maximum loads from 250 to 1,100 lbs. per trolley.

    Standard Trolley Design:

    Flanged or Crowned steel wheels, depending on model
    Anti-lift rollers
    Sealed bearings are pre-lubricated for life
    Tow trolley included
    Zinc plated hardware
    Heavy duty bumpers
    Typical mounting on S3 or larger beams

     

  • PDQ 300 I-Beam Festoon
    Call for pricing

    PDQ 300 I-Beam Festoon incorporates economically priced yet rugged trolleys for lighter systems. Max capacity 300 lbs. per trolley at 400 fpm.

    Standard Trolley Design

    300 lbs. capacity per trolley at 400 fpm
    Trolleys have hardened 2.25" dia. steel wheels with oversized sealed ball bearings
    Accepts either flat or round cable/hose
    Single clamp design (two windows). Rubber compression clamp accommodates a variety of hoses/cables.
    Fits three sizes of I–beams: S3 x 5.7, S4 x 7.7, S6 x 12.5
    Choice of three saddle dia. (6", 9", 12") in widths to 11"
    Fabricated steel construction–no castings
    Baked polyester finish provides superior protection from corrosive marine environments
    Two steel anti–lift rollers

  • The PDQ 450 and 700 I-Beam Festoons are similar to the PDQ 300, but designed for heavier loads...450lbs or 700 lbs. per trolley. They are economically priced yet filled with outstanding features.

    Standard Trolley Design:

    Choice of 2 capacities: PDQ-450 (450 lbs. capacity per trolley) 2.5" dia. wheels
                                                  PDQ-700 (700 lbs. capacity per trolley). 4.0" dia. wheels
    Trolleys ride on 4 large dia. hardened steel wheels with oversized sealed ball bearings
    Accepts either flat or round cable/hose
    Dual clamp design (2 windows). Rubber compression clamps accommodate a variety of hoses/cables
    Fits 3 sizes of I–beams: S6 x 12.5, S8 x 18.4, S10 x 25.4
    Choice of 3 saddle dia. (10.24", 14.12", 18.12") in widths to 30"
    Fabricated steel construction–no castings
    Baked polyester finish provides superior protection from corrosive marine environments
    Four steel anti–lift rollers

  • I-132 Festoon
    Call for pricing

    The I-132 Container Crane Festoon System is specially designed to provide the high speed, high capacity service required by container cranes, the I-132 Festoon System is packed with features. Capable of speeds to 600 fpm and loads to 500 lbs. per trolley.

    Standard Trolley Design:

    All the FEATURES needed to fit your application
    Built and backed by the leader in cable and hose management systems
    Fits 2.95"(75mm) or wider beams
    Heavy-duty dual bumpers
    Choice of hardened steel or nylon wheels: 4.00" dia, crowned and pre-lubricated
    Fall-prevention frame
    Anti-lift rollers
    Available with dual clamps or cable clips
    Heavy-duty shock cord mounting

  • 12