Site Settings


Pick Color(Current Color is blank)

Pick Color(Current Color is #555555)

Pick Color(Current Color is #000000)

  • Custom CSS
  • Custom JS

CATEGORIES

Metering Valves

Metering Valves

PRODUCTS

  • Cartridge Chamber Metering Valves
    Call for pricing
    The Cartridge Chamber Metering Valve is based on a special principle. The metering chamber is an exchangeable cartridge contained within an aluminium valve body. There are cartridges available with a defined volume of 0,25, 1,00 and 10,00 cm�. The volumetric output is infinitely adjustable between its limits. Speed of metering depends on the material viscosity and the material pressure. Adjusting the metering volume can be achieved easily by simply changing the metering cartridge.

    Metering volume: 0.025 - 10 cm�
    Cartridge: 0.25 / 1.0 / 10 cm�

      Product Features

    Metering volume infinitely adjustable
    Valve body made of aluminium
    Capable of withstanding high pressure
    Snuff back effect
    Pneumatic control

      Options

    Solenoid valve plate
    Double initator receptacle: Monitoring the stroke needle position

      Technical Specifications

    Metering volume / Shot, cm Material input pressure in bar
    (minimum maximum) Weight approx. kg
    0.025 - 0.25 40 - 100 1.00
    0.050 - 1.00 20 - 150 1.00
    0.500 - 10.00 6 - 150 1.00
  • Chamber Metering Valves
    Call for pricing
    Filling: The valve is in the initial position when the control pressure applied on the compressed-air connection. The valve needle in the control valve is in the upper position, thus closing the material outlet. The material access to the metering chamber is open. The material enters the control valve by means of the material pressure and flows into the metering chamber. Due to the contact surface of the piston, the piston executes an upward stroke. The metering chamber fills up automatically to the pre-defined volume.

    Metering: Material is metered when the compressed-air connection of the valve is charged with compressed air. The valve needle executes a downward stroke, thus closing the material access to the metering chamber. The material outlet opens. The material pressure has an effect on the piston step, which enters the metering chamber and feeds the material to the material outlet. An accurate metering volume is discharged. The snuff back effect carried out during the refilling, prevents the material from dripping after metering is finished.

      Product Features

    Valve body made of aluminium
    High maximum working pressure
    Snuff back effect
    Pneumatic or electric operation

      Options

    Solenoid valve plate
    Stainless steel version
    Fine adjustment
    Initator receptacle: Monitoring the metering piston position
    Manual handle with trigger for pneumatic or electric operation

      Technical Specifications

    Metering volume /
    Shot, cm� Material input pressure in bar
    (Minimum - Maximum) Weight approx. kg
    0.050 - 0.50 15 - 150 0.50
    0.100 - 3.00 15 - 150 0.60
    0.500 - 12.00 15 - 150 1.95
    5.000 - 100.00 15 - 150 4.10
  • Needle Metering Valves
    Call for pricing
    Needle metering valves are used for processing low to high viscosity media. The valve consists of two separated parts. This separation means that it is not possible for any leaking material to flow into the actuating air cylinder that might otherwise cause a malfunction of the valve. The needle is sealed by means of an adjustable packing set (Metering volume: 0.001 - 3.0 cm3).

      Product Features

    Adjustable metering volume
    High-precision, repeatable metering
    Low maintenance packing, extending valve life
    Air-gap separation between wetted parts and air cylinder
    High speed cycle time, up to two shots per second
    Pneumatic control

      Options

    Solenoid valve plate
    Wetted parts made of stainless steel
    Valve seat and needle made of tungsten carbide for processing abrasive materials
    Stroke detection
    Manual handle with trigger or foot pedal for pneumatic or electric operation
    Universal holder for adjusting the valve in height and depth

      Technical Specifications

    Metering volume / Shot, cm� Material input pressure in bar
    (minimum - maximum) Weight approx. kg
    0.001 - 0.01 3 - 20 0.25
    0,003-0,20 3-20 0,75
    0,003-0,20 3-50 0,75
    0,020 - 0.40 3 - 20 1.40
    0.050 - 1.00 3 - 20 1.40
    0.100 - 3.00 3 - 20 1.40
  • 1