Site Settings


Pick Color(Current Color is blank)

Pick Color(Current Color is #555555)

Pick Color(Current Color is #000000)

  • Custom CSS
  • Custom JS

CATEGORIES

Long Range Stick Nodes

Long Range Stick Nodes

PRODUCTS

  • Counter Stick
    Call for pricing
      Features

    Provides a wireless interface to remote counting sensors such as flow meters
    Two digital interfaces, dry contact, open collector and other interfaces
    Calculates:
    Total Counts
    Instantaneous Frequency
    Frequency Since Last Read
    State
    Measures to 2 KHz
    Message forwarding capability
    Rugged design for demanding outdoor environments
    Low power consumption
    Range up to 4 miles
    Simple to install and maintain

    The SignalFire Remote Sensing System� is a flexible, adaptive radio networking system that seamlessly integrates analog and digital sensors. With a range of up to 4 miles, the system is self installing and self configuring. This system compares very favorably, from a cost perspective, with installed conduit at distances of 100 feet or more.

    Operating Temp: -40C to 70C
    Humidity: 0% � 100% condensing
    Power: 6-36 VDC
    Data Interface: Modbus RS485
    Data Update Rates: User configurable with configuration utility
    Radio Power: 500 mW
    Antenna Type: Omnidirectional
    Antenna Gain: 5dB
    Receive Sensitivity: -105 dB
    Frequency: 902-928 MHz license-free ISM band compliant with FCC Part 15
    Range: 3+ miles (line of sight)
    Networks: Up to 64 separate networks
    Enclosure: Weathertight integrated electronics and antenna
    Internal Diagnostics: Line voltage, Signal strength, Error conditions
    Safety Rating: Non-insendive, Class 1 Division 2 groups C and D, T5 (Modbus version)
  • Modbus Stick
    Call for pricing
    The SignalFire Remote Sensing System� is a flexible, adaptive radio networking system that seamlessly integrates analog and digital sensors. With a range of up to 4 miles, the system is self installing and self configuring. This system compares very favorably, from a cost perspective, with installed conduit at distances of 100 feet or more.

      Features

    Potted electronics, a high-gain antenna, and a multi-mount aluminum base all contained in a high-impact polycarbonate �Stick.�
    Provides a wireless interface to remote Modbus sensors
    RS485 Modbus RTU interface (RS232 also available)
    Supports multiple Modbus devices
    Automatically reads and transmits sensor registers at user-definable intervals
    Outbound capability for sensor Modbus register updates
    Writes Modbus registers
    Message-forwarding / mesh-networking capability
    Rugged design for demanding outdoor industrial environments
    Range up to 4 miles
    Simple to install and maintain
    Class 1 Division 2, Temp Code T5, Groups C&D. Conforms to ISA 12.12.01 and UL 916, Certified to CSA C22.2 No. 142 and CSA C22.2 No. 213

    Operating Temp: -40C to 70C
    Humidity: 0% � 100% condensing
    Power: 6-36 VDC
    Data Interface: Modbus RS485
    Data Update Rates: User configurable with configuration utility
    Radio Power: 500 mW
    Antenna Type: Omnidirectional
    Antenna Gain: 5dB
    Receive Sensitivity: -105 dB
    Frequency: 902-928 MHz license-free ISM band compliant with FCC Part 15
    Range: 3+ miles (line of sight)
    Networks: Up to 64 separate networks
    Enclosure: Weathertight integrated electronics and antenna. Integrated cable (25' standard)
    Internal Diagnostics: Line voltage, Signal strength, Error conditions
    Safety Rating: Non-insendive, Class 1 Division 2 groups C and D, T5
  • Multi IO Stick System
    Call for pricing
    The Multi-I/O Stick System is designed to connect to a Modbus Stick and provide sophisticated wireless I/O control and monitoring at remote locations. Ideal for Separator, Heater Treater, Plunger Lift and Other Applications.

    Features and Benefits of the Multi-I/O Stick System
    8 Analog inputs. 4-20mA / 1-5V switch selectable (16 bit) with units of measure scaling and threshold monitoring
    6 Digital Inputs with report on state change and totalizing
    2 Single Pole and 2 Double Pole relays with direct and programmable pulse control
    Up to 8 units may be daisy chained
    6-36VDC input voltage rage.
    Ultra-low power operation
    Class 1 Division 2, Temp Code T4, Groups C&D. Certified to CSA C22.2 No. 213, UL 61010-1, and CSA C22.2#61010-1, Conforms to ANSI/ISA 12.12.01
    Easy to use table driven configuration interface
  • Remote Shutdown System
    Call for pricing
    Remote Shutdown System
    In environments like oil fields, decisions to start and stop actions often need to be initiated remotely from where the action happens. For instance, if a storage-tank battery fills up, oil flowing to the battery must stop to prevent an overflow, but the controlling device making that “decision” (PLC or SignalFire Gateway) may be miles away.

    Remote Shutdown — Wirelessly
    That’s where SignalFire’s Remote ShutDown System (RSDS), a long-range wireless monitoring and control system, comes in. The RSDS automates this action without the need for long, costly conduit runs, and system components can also be easily relocated as needs evolve.

    Safety Built Into Every Node
    Our exclusive CommSafe system automatically sets its outputs to a user-configurable safe state if an interruption in wireless communication is detected.

    PLC-Based Control, SignalFire Gateway Control, or Stand-Alone
    The SignalFire RSDS can be implemented with a PLC monitoring inputs and generating control commands via the SignalFire Gateway and Counter Stick I/O node. Or, in environments where a PLC is not required for other needs, the SignalFire Gateway can monitor inputs and generate control commands autonomously as a stand-alone system.

    Remote Switch
    The Remote Switch option allows for a standard RSD System to be configured for use as a stand alone system without a Gateway. Using a simple table based configuration the system can be setup to switch the relay outputs when one (or more) remote nodes reaches a limit. A typical application is to shut off a well when one or more remote tanks become full.

    Features
    Stand alone system. No PLC or Gateway required
    Simple configuration interface
    Accepts data from all SignalFire remote nodes
    Two relay outputs
    Fail Safe capability
    Range up to 4 miles
    Small form factor DIN mount relay enclosure
    Status LED’s

    Operating Temp: -40C to 70C
    Power: 6-36 VDC, (battery power optional)
    Relay Outputs: 2A, 30V, SPDT
    Digital Inputs: Dry contact or 30 volts max (push-pull)
    Radio Power: 500 mW
    Antenna Type: Omnidirectional
    Antenna Gain: 5dB
    Receive Sensitivity: -105 dBm
    Frequency: 902-928 MHz license-free ISM band, FHSS, FCC part 15 compliant
    Range: 3+ miles (line of sight)
    Internal Diagnostics: Supply voltage, signal strength, error conditions
    Safety Rating: Non-insendive, Class 1 Division 2 groups C & D
  • 1